juban1.gif (4732 Byte)
D.GIF (94 Byte)Deutsch Home Products Catalogues Contact About us
 
Steel Sheet Thickness Meter

for (ferrous) thin steel sheets, TFS and tinned sheets.
These meters are for sheet thickness determination on magnetic sheets. A digital display shows the sheet thickness as soon as the sensor is set on a sheets surface.
For more details please click on a type !

 

Type: Thickness range: Resolutions: Sheet- Spot: Features:
  FM 08  

 FM089.JPG (3214 Byte)film.jpg (2465 Byte)

0- 0.500 mm 0.001 mm 20 mm Battery powered pockedsized meter
with integrated sensor
  FM 11 

 FM117.JPG (3705 Byte)

0- 2.00 mm 0.01 mm 43 mm

 

 

Battery powered
handheld meter
with separate sensor
FM 12 ( New! )

fm121.jpg (4477 Byte)
0- 1.000 mm 0.002 20 mm Battery powered
handheld meter
with separate sensor
Type FM 08
For fast and easy measurements of the sheet thickness on cans, ends, blanks, sheets and coils.
Thickness measurements are able on ready formed, open or closed empty or filled cans without destruction of the can or removing the lacquer/ coating/ printing inside or outside. The FM 08 meter is factory adjusted with sample sheets used in the canmaking industry. Therefore no adjusts are necessary on the user side of the meter. The meter is shipped ready for use.


Sheet thickness range: 0 -0.500 mm
Resolution: 0.001 mm
3- stage, LCD- Readout with manual operated illumination push- button.

top.jpg (611 Byte)
For meassurements on:

Fig. 5 sheets / blanks...

FM082.JPG (4964 Byte)

Fig. 6 cans...

.FM083.JPG (4549 Byte).

Fig. 1 Meter FM 08

 FM081.JPG (12835 Byte)

Fig. 7 ends...

FM084.JPG (4272 Byte)

enlarge picture

Fig. 2
Meter- Set, consisting off:
Meter FM 08, Wall- plug- in battery charger, manual and case.

FM087.JPG (12602 Byte)

Fig. 8 ..pails and drums.

FM086.JPG (3841 Byte)

top.jpg (611 Byte)
Type FM 11

Electronic steel sheet thickness meter / gauge. Singlesided magnetic method.For accurate measurements on large sheets or sheet segments for example that can not measured with calibers or micro meter screws.The meter is battery - powerd with a rechargeable battery.

Range: 0 - 2.00 mm
Resolution: 0,01 mm
3- stage LCD- display 13 mm digits, with display illumination push- button.
   



Fig. 9  Application example: Thickness measuring on a ready formed sheet.Handy meter with separate sensor also for difficult to reach measurment applications.

FM113.JPG (5133 Byte)
enlarge picture

Fig. 3 Meter FM 11 with sensor and stretchable sensor- cable

fm112.jpg (12197 Byte)

 

Fig. 10 Meter- set, consisting off: Meter, sensor, sensor- cable (stretchable), wal-plug-in battery charger, case and manual.

FM111.JPG (4500 Byte)


Type FM 12

Electronic steel sheet thickness meter / gauge. Singlesided magnetic method. For accurate measurements on large sheets or sheet segments for example that can not measured with calibers or micro meter screws. The meter is battery - powerd with a rechargeable battery. There are optical and acoustical battery low and thickness overrange signals. By the use of a permanent magnet made of a special rare-earth alloy for measuring magnetic field generator, the sensor is relatively small in its dimensions and the power consumption of the measuring device is so small that a mains-independent operation of approx. 30 hours on a single battery- charge is possible.

Range: 0 - 1.00 0mm
Resolution: 0,002 mm
4- stage LCD- display 11 mm digits, with display illumination push- button.

 

Fig. 11 Application example: Sheet thickness measurment on a car back door

fm123.jpg (10114 Byte)

Fig. 4 Meter FM 12 with sensor and stretchable sensor- cable


fm122.jpg (20782 Byte)

Fig. 12 Application Example: Sheet thickness measurement on car door frame

fm124.jpg (11421 Byte)

top.jpg (611 Byte)
balk750.gif (1126 Byte)
Jungmichel Industrieelektronik GmbH. Waldpark 7.D-75239 Eisingen.Germany.Phone:+49(0)7232 Fax:+49(0)72328407